Magnetic-electric module as part of the electric car

SUMMARY: The purpose of this demonstration is to show the capabilities of this module in its application in electric vehicles. Most importantly, its application is not tied to structural changes in electric vehicles. This module is put in place one of batteries or any specially designated place for it. Structural changes in the electric does not require. It is compatible with any vehicle using the power of engines. Another is that using this module, the distance from the electric vehicles increases two, three or more times, depending on materials used in the module. Let us see in our case what we received. The output of the module will receive a 12.5 to 13.5VDC. As we have three lamps 12V/50W connected in series. Or in the case load will be about 30W. At the same time and measure current flowing from the battery through the test lead working in the frequency range from zero to 100 KHz. We measure the effective voltage that is fed into the module and thus determine the power inlet module. Will measure and determine and output power module. You'll find quite a sensitive difference between the two, the relationship between power output and that of the entrance. Both digital multimeter will be shown the values of the currents at the entrance and exit. Turn on the system. The generator of control pulses the pulse duration 760 mks and repetition rate 33Hz. We note the importance of effective input current, which is 2.5A. 100 mV readings to meet at 1A. Effective voltage input ...